序号 测试项目 测试内容 我司用的标准
1 REGULATORY
Low Voltage Directive 2006/95/EC
(Safety for battery charger)
 BS EN60335-2-29:2004
BS EN60335-1:2002 + AMD15536 + AMD16414 + AMD16671
 EN60335-2-29:2004    EN60335-1:2002 +A11:2004 +A1:2004 +A12:2006
2 REGULATORY
Low Voltage Directive 2006/95/EC
(EMF for battery charger
 BS EN50366:2003 + AMD16426 EN50366:2003 +A1:2006
3 REGULATORY
EMC Directive 2004/108/EC
(EMC for battery charger)
 EN55014-1:2000 + A1 + A2
EN61000-3-2:2006
EN61000-3-3:1995 + A1 + A2
EN55014-2:1997
 EN55014-1:2000 + A1 + A2  EN61000-3-2:2006      EN61000-3-3:1995 + A1 + A2  EN55014-2:1997 
4 REGULATORY

Statutory Instrument 1994 No. 1768

The Plugs and Sockets etc. (Safety) Regulations 1994

(for battery charger with integral plug portion)

(Not required if the battery charger is of cord-connected type for the mains input
 BS1363-1:1995 + AMD9541 + AMD14539

(Covering clause 12.1, 12.2, 12.3, 12.9, 12.11, 12.12, 12.13, 12.16, 12.17, 22.2 and 23.)
 我司根据客户提供的BS插头符合BS1363-1标准的证书,在报告中会体现这一标准,不过一般情况下我司只体现BS1363-1:1995,后面的增补号要视客户提供的证书信息判定是否写上,因此这一标准主要是看贵司所用的插头的供应商提供的插头证书上的标准是否与此标准符合